bing tracking image
  1. Electrical Tools
  2. Performance Tool
  3. Testers
  4. Circuit Tester
Hook Probe Circuit Tester
Performance Tool

Hook Probe Circuit Tester

Part Number: PTW2993
In Stock
$14.56
Retail:$24.73
You Save: 41%
Electrical Tools
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
From under-dash tangles to trailer wiring headaches, this circuit tester helps you zero in on electrical issues fast. It hooks on, lights up, and powers through the job without slowing you down. 1-800-940-8924 to order Performance Tool electrical tools part number PTW2993 or order online at etrailer.com. Free expert support on all Performance Tool products. Great prices and Fastest Shipping for Hook Probe Circuit Tester. Electrical Tools reviews from real customers.
  • All Info
  • Reviews (68)
  • Q & A (0)
  • Photos

Performance Tool Electrical Tools - PTW2993

  • Testers
  • Circuit Tester
  • Performance Tool

From under-dash tangles to trailer wiring headaches, this circuit tester helps you zero in on electrical issues fast. It hooks on, lights up, and powers through the job without slowing you down.


Highlights

  • Test 6V and 12V Circuits: Great for automotive and trailer electrical systems
  • Hands-Free Testing: Molded hook locks onto wires so you can work more efficiently
  • 4' Insulated Cord: Easily reaches tight or awkward spots
  • Durable Build: Oil and heat-resistant cord holds up to tough conditions
  • Bright Bulb: High-intensity light shows clear results at a glance
  • Fits in Your Toolbox: Compact and easy to take on the go

Features to know about

Test Light for Everyday Diagnostics

Test Light

Perfect for checking fuses, wires, and connectors, this tester helps you quickly track down power issues in 6V and 12V DC systems. The high-intensity bulb lights up the moment current is detected, giving you instant feedback without the guesswork.

Hook-On Design Frees Up Your Hands

Hook Probe

The molded hook probe pierces the wire and latches on, so you don't need to hold the tester in place while you work. It makes multitasking in tight spaces a lot easier.

Extra Reach When You Need It

Tester with Cord

The 4' insulated cord gives you the flexibility to reach tight spots like under the dash or near the trailer tongue. It holds up to heat, oil, and grime, staying reliable through real-world garage conditions.

Specs

Application:

  • Electrical systems: 6V and 12V DC
  • Compatible with cars, trucks, trailers, and motorcycles

Tester Type:

  • Wire-piercing molded hook probe

Test Lead:

  • Length: 4 feet
  • Insulated, oil and heat-resistant cord

Lighting:

  • High-intensity bulb for clear visual feedback

Warranty:

1-year limited



W2993 Performance Tool Circuit Tester

Replaces Draw-Tite 3808





Customer Satisfaction Score:

Ratings & Reviews

4.7

68 reviews
Review sort icon
From under-dash tangles to trailer wiring headaches, this circuit tester helps you zero in on electrical issues fast. It hooks on, lights up, and powers through the job without slowing you down.

by:



by:



by:

Very friendly service, thank you Korren. Ordered on Tuesday, received on Thursday.



by:

Looks good, haven't used it yet



by:

Works perfect



by:

Nice tool to own!



by:

Not what worked for me.



by:

Ehhh.



by:

Vary good for my trailer.



by:

Ricky C. profile picture

Ricky C.

1/26/2022

Works Fine



by:

Quality item. Works great for quick DC tests.



by:

Simple tester, does what its supposed to do.



by:

Easy to use and definitely helpful when looking for a specific wire.



by:

I have yet to use it. It looked like something I should have so I ordered one.



by:

Probe works really good

Terry profile picture

Terry

3/19/2022

Tester has worked out really well, only used it a few times



by:

Looks to be well constructed & easy to use. Frees up your hands for other tasks, & has many other circuit tracing applications as well.



by:

Cheap but does the job.



by:

I had a tester like this years ago and I broke the end off.
I really liked the tester as you can hook it over a wire and probe it to see
if you have voltage.
Been looking for one for a long time.
You can find cheap junk ones but this one is just like the good one I had years ago.
Glad I found it and is is very well built.
Should last me a long time.
Was shipped fast also.
Will try and not break this one.
Thanks e trailer.



by:

Haven't needed this tool yet but good to have it in my 12 volt electrical kit.



by:

Easy installation.
I sold the trailer
shortly after installing this item.
It worked well for the amount of time that I owned the trailer.



by:

The tool is terrific and the service was outstanding. It arrived 2 days before predicted.



by:

I bought this prob/circuit tester in order to make some minor electrical repairs to our Scamp 13. I carry it along on all our trips. It has been tremendously helpful isolating shorts that result from vibration and wear and tear. Furthermore, the tutorial videos here on etrailer have been equally helpful.

Scamper profile picture

Scamper

11/10/2023

Reliable and useful as ever.



by:

Amazing how quick y’all shipped it out



by:

This is what I needed to track down a broken wire. I could hook it to the wire at the bqck of the truck and see what is going on from the front by myself



by:

Nice product, easy to use and durable construction. Fast delivery too.


25
25

See what our Experts say about this Performance Tool Electrical Tools

  • No Trailer Connection on Tekonsha P3 Brake Controller 90195 on a 2000 Toyota Tundra
    I would start by inspecting the connector on your trailer and the vehicle to make sure there is not corrosion in the connector which could be causing a bad or weak connection. If there is corrosion in the trailer side connector, you would need to replace it with 7-way Connector, part # A7WCB. For the replacement vehicle side connector, you would need Adapter 4 Pole to 7 Pole, part # 30717. For future use, I would recommend using Dielectric Grease for Electrical Connectors, part # 11755,...
    view full answer...
    Image 1 for
  • Troubleshooting a Tekonsha P3 Brake Controller that Reads Trailer Not Connected
    If you sever the blue wire leaving the P3 controller part # 90195 leaving enough room to reconnect it and test the end of the wire leaving the controller with a circuit tester like part # PTW2993 you should see voltage when you slide the manual override lever. If not, then the brake controller is bad. If you see voltage there instead then the problem is somewhere on the brake output circuit of your vehicle or trailer. Corrosion on the trailer connector typically causes this problem. If...
    view full answer...
  • How to Wire Reverse Lock Out Solenoid on Hydraulic Trailer Brake Actuating Coupler
    I don't have a wiring diagram, but I'd be happy to explain it for you. In order for the reverse solenoid on a Hydraulic Brake Coupler like # DM62VR to function, one of the two wires leading from it needs to be connected to the wire from the center pin of the trailer connector, which is typically the yellow or purple wire (use a circuit tester like # PTW2993 to confirm). The remaining wire is grounded to the trailer frame. On the vehicle side, you'll need to make sure that the center...
    view full answer...
  • How to Test Demco Charge Line Kit DM66VR if its Working
    Hey Andy, do you have a circuit tester like the part # PTW2993? You could probe the wire of the Demco Charge Line Kit part # DM66VR and see if there is voltage present. If so, then it's charging like it should be.
    view full answer...
  • Should Blue Wire From Brake Controller Have Constant Power
    The blue wire coming from the back of your Tekonsha Voyager Brake Controller # 39510 is for brake output to the 7-Way connector. This wire should only have power with the brake pedal depressed or the manual override activated on the brake controller. If you are getting constant power on this blue wire this may be an indication that the controller is bad but there is an easy way to test this. You will want to first sever the blue wire several inches from the back of the controller. Then...
    view full answer...
  • Troubleshooting Only One Side of Trailer Brakes Locking Up
    Yes, when the electric signal is sent from the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 to the trailer's brakes, it should cause both sides to lock up. Since only one side is locking up, it could indicate that one brake assembly needs to be manually adjusted. I attached a video that shows how to do this process. If that doesn't get it to respond then there is possibly an issue with the wiring going into the brake assembly which you can test using a circuit tester like # PTW2993....
    view full answer...
  • Troubleshooting Non-Working Light Signals After Installing A Curt Tail Light Converter Wire Harness
    Hey Larry, A faulty ground can cause all sorts of goofy problems so it's a great place to start your troubleshooting. I'd check the ground for the tail light converter # C56196 as well as the ground for the lights. Are the lights on the trailer LED? If so you'll need to install resistors # TK32VR for each circuit for this converter to be compatible. From there you can doublecheck that you have the wires connected to the appropriate tail light wiring on the towing vehicle to ensure the...
    view full answer...
  • Troubleshooting No Power On Curt 4-Way Wiring Harness
    In order to narrow this down I would start by checking the vehicle side of the connector. Check and see if there is power using a circuit tester like the # PTW2993. If you find that there is power then you can rule out anything on the vehicle side and you need to be checking the # C56332 . If you don't have power then it is a problem with the vehicle. Since you already checked your fuses it is probably a short in the wiring. If you are unable to locate it you will probably have to take...
    view full answer...
  • Troubleshooting an SH Code on the Tekonsha PRIMUS IQ Electronic Brake Controller # TK90160
    If you click on the link that I have provided for the installation instructions, you can see the troubleshooting chart just below the installation details. The SH code that you see on your Tekonsha PRIMUS IQ brake controller indicates there is a short somewhere on the brake output circuit when idle, or when the brake pedal is not being pressed. Tekonsha states that this issue can sometimes be caused by some test lights if you are using test lights. To troubleshoot this issue, start by...
    view full answer...
  • Troubleshooting Curt Echo Brake Controller that Only Works with Manual Override Lever
    Most likely you have some dirt or corrosion built up on the pins of the trailer connector on your vehicle. What you described is how a brake controller acts when it is not seeing a brake light signal to tell it to activate. Try cleaning the pins of the 7-way and let me know if that changes anything. Also make sure that all of the circuits of the 7-way are currently active. You can do this with a circuit tester like part # PTW2993 testing each pin as you apply all of the different turn signal...
    view full answer...
  • Troubleshooting Aries ActionTrac Motorized Running Board Not Working On Passenger Side
    As you only have the passenger side not working it sounds like their is either damage to the wiring or the step motor. First you will want to use a Test Light # PTW2993 to check for power on the harness of the Aries ActionTrac Motorized Running Boards # AA3047902. If you do not have power at the motor then you will need to follow along the harness to the control board checking for where it loses power. If there is still no power at the control board check the connector to ensure it is not...
    view full answer...
  • How To Find Cold Side Of Stop Light Switch On Vehicle For Brake Controller Installation
    Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part # PTW2993 to test the wires. Since the auto manufacturers can use different color wires it is always best to use a tester and check the wires for function and not color. You would need to find the wire that only shows power when the brake pedal is pressed. That would be the wire that gets attached to the...
    view full answer...
  • Replacement Motor for Lippert Stabilizer Jack 198641
    Hey Jeff, so we do have the replacement motor for your 198641 setup with the part # LC138445 which is possibly your problem but I would check with a circuit tester liker part # PTW2993 to see if voltage is getting to the motor when the switches are used to verify for sure the problem is the motor. Since both switches you tried aren't working I would assume it is the motor though.
    view full answer...
  • Troubleshooting Prodigy P2 Brake Controller with NC No Trailer Connected Error Code
    The NC on your Prodigy P2 # 90885 means there is no trailer connection being recognized. Usually this is due to the controller not seeing enough power draw on the 5 o'clock pin of the 7-way (the brake controller output). This can be as basic as needing to clean your connections with a little sandpaper or steel wool, a bad ground connection due to rust or debris on your trailer, or as big as a short in that wire. I recommend using a circuit tester like # PTW2993 to check that pin for...
    view full answer...
  • Brake Controller Has Constant 12V Power But Trailer Brakes Do Not Engage
    First I suggest you double check your wiring from the controller. Typical brake controller wiring is: Red wire goes to the brake switch cold terminal, which gets power only when the pedal is pressed; Blue wire connects to the trailer brake circuit; White wire is ground; Black wire connects to the 12V power source. Please note that we do offer vehicle-specific wiring harnesses that plug into the OEM socket under your dash and provide bare wires on the other end to wire directly to your controller....
    view full answer...
  • Troubleshooting a Tekonsha P3 Brake Controller With Trailer Brakes That are not Showing Power
    I am not entirely sure what process you took so I'll give you some other things to try, or maybe a different way to test the Prodigy P3 # 90195. First, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester such as # PTW2993 to test the end of the blue wire coming out of the controller. It should only have power when you apply the manual override; if it shows power at idle then there is an issue with the controller, and it will need to be replaced. You...
    view full answer...
  • Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
    If both turn signals blinking at the same time is a new problem that has occurred after the harness had worked fine before, there are a couple of possibilities that may be causing the issue. First, the easiest thing to check are the trailer connectors. You will be looking for any dirt or corrosion build up in one or both connectors (vehicle and trailer side). Clean them out if you find any dirt/corrosion and see if that helps. If you still have the problem, disconnect the trailer to test...
    view full answer...
  • Troubleshooting No Green Light on Tekonsha Voyager Brake Controller
    The green light on top of your Tekonsha Voyager Trailer Brake Controller # 39510 indicates that a trailer is connected to your vehicle. If this light is not turning on when connected to a trailer there are a couple things, you can check. I first recommend inspecting both the vehicle side and trailer side connectors for any debris or corrosion built-up around the pins that needs to be cleaned out. If the connectors look good, you will next want to test the brake output pin on the vehicle...
    view full answer...
  • Troubleshooting Tekonsha Prodigy P2 Brake Controller that Doesnt Recognize Trailer
    It's possible the brake controller is bad, but you definitely want to check some other things before you purchase a replacement. The first thing to do is inspect both the truck's and the trailer's connectors to make sure the pins are clean and free of debris. On the trailer connector at the rear of your 2004 Chevrolet Silverado test the pin at the 5 O'clock position with a circuit test like # PTW2993. You'll need someone to engage the manual lever on your P2 for this. If this checks...
    view full answer...
  • Troubleshooting Curt T-Connector C56040 That Doesn't Seem To Be Working
    Hey Lawrence, thanks for reaching out. I'd want to start here by testing the 4-flat on your Subaru. First make sure the in-line fuse is fully inserted, then make sure the white wire is grounded to good clean metal free of any corrosion or paint. Also make sure the white plug is fully seated and connected to the vehicles plug. If all of that checks out, the next step is to test the wires going into and out of the converter box. The best tool for this is a wire tester like part # PTW2993....
    view full answer...
  • Troubleshooting Lippert Electric Stabilizer Jack Not Working
    We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.
    view full answer...
    Image 1 for
  • Troubleshooting Curt Triflex Brake Controller Showing OL Code on Display
    The Curt Triflex brake controller is known to have more problems than other brake controllers so I would not rule out the problem being the controller. Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to reconnect it and then apply the manual slide. Using a circuit tester like the Quickee Tester, part # PTW2993, you should get output to the controller side of the wire you severed. If the manual slide activates...
    view full answer...
  • Demco Stay-IN-Play - How Do I Wire LED Indicator Light?
    Hello Ralph, thanks for reaching out. The LED indicator included with your Demco Stay-IN-Play Duo Flat Tow Brake System # SM99251 should be connected to the cold side of the brake switch. We do not have any diagrams or photos that show the exact wire color for this so your best bet will be to use a wire tester and poke around until you find the wire that is normally cold, but has 12v power only when the brake pedal is pressed. A dealership may be able to tell you the exact wire color, otherwise...
    view full answer...
  • Troubleshooting Trailer Brakes that Stopped Working
    There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check. First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake feed circuit and ground are at the bottom of the connector so moisture affects these connections first. Next, check the ground wire on the vehicle and trailer connectors, trailer brake magnets and the brake controller itself. If there is a bad...
    view full answer...


< Previous
123. . .308




Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Tyler C
Edited by:
Tyler C
Employee Dustin K
Video by:
Dustin K
Employee Shane H
Video by:
Shane H
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Jacob H
Installed by:
Jacob H
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kim H
Updated by:
Kim H
Employee Erin H
Written by:
Erin H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.